Company new

Rivet Nut Product Series and Material Matching

Rivet Nut Product Series and Material Matching

Clinch nuts and blind rivet nuts both create threads in thin sheets—the former locks by pressing deformation, the latter by pulling to form a clamp. Understanding types, size series and material matching is the basis for correct selection. Dimensions per drawings and datasheets.

Both solve the problem that thin sheets cannot be tapped directly; they differ in installation, thickness range and removability—judge by structure and process.

Type Distinction

Clinch nuts are pressed into holes by a press; knurling or flange embeds into the sheet for torque and pull resistance—suited to accessible, stable sheet-metal parts. Blind rivet nuts are inserted from one side and pulled—suited to closed profiles, tubes and single-side access.

Both offer through/blind and flat/countersunk forms by space and appearance. Clinch studs and pins complete the sheet-metal connection family.

Size Series

Sizes follow thread—M3, M4, M5, M6, M8, M10, with smaller sizes for electronics. Within a thread size, models differ by thickness and grip range; mismatches cause loose or pierced installation.

Blind nuts vary body length for grip; clinch nuts vary by sheet thickness and hole. Confirm thickness and hole first, then model—never fit a long grip to a thin sheet.

Materials and Coatings

Common materials are carbon steel, stainless and aluminum. Carbon is economical and strong for general sheet metal; stainless resists corrosion for outdoor and humid use; aluminum is light for chassis and heat structures.

Coatings include zinc, nickel and passivation per corrosion needs. Stainless can be passivated; aluminum needs galvanic isolation from steel via insulating washers or coatings.

Thickness and Hole Matching

Thickness sets grip range and model—clinch nuts need thickness within the recommended band; too thin under-sets, too thick damages tooling. Holes are made per spec; out-of-tolerance holes weaken torque or block insertion.

Blind nut grip ranges cover thickness; outside the range causes under-setting or mandrel breakage. Confirm thickness, hole and material together, and trial-fit samples when needed.

Tooling

Clinch nuts need a press and matching dies with pressure and stroke per size; blind nuts need a riveter and nosepiece with stroke and force per size. Tools and products must match—mixing causes poor installation.

Volume production uses unified tools and parameters with maintenance and inspection routines. Tool condition directly affects quality—replace worn nosepieces and dies promptly.

Customization and Selection Support

Non-standard sizes, lengths and coatings can be customized; confirm thickness, hole, material and volume, validate samples, then produce. Common sizes are stocked for shorter lead times.

Selection support includes model recommendation from drawings, trial samples and installation parameters. Clear application and structure details reduce trial and error and speed up the right series choice.

Installation and Quality Judgment

Clinch installation follows die and force settings; blind riveting follows nosepiece and stroke. After installation, check flushness, rotation and thread smoothness. Parameters are fixed after first-article approval.

Judgment relies on torque-out and pull-out sampling plus appearance and dimensions. Issues are traced in order—hole, thickness, tool parameters—then validated on a small batch.

CONTACT US

Contact: Mr. Deng

Phone: 13928071304

Tel: 0756-8586520

Email: lizhong@zhjiali.com

Add: 102, Building 4, No. 4 Fuyuan Road, Waisha Village, Shenwan Town, Zhongshan City, Guangdong Province,China